Dataman 48Pro2C EPROM Programming Device

General:

• It has the same features as the 48Pro+, but the 48Pro2c offers faster programming speeds (20-75%) for high-capacity materials.
• Thanks to the reinforced 48 TTL pins, you can measure the capacity of each socket by pulling H/L/Down/Up.
• With its internal pins, it distributes current signals at high speed without being affected by grounding or voltage fluctuations.
• The pins enable programming of low voltage devices by reducing the working voltage to 1.8V.
• The device conducts self-tests by performing cable and connection checks before programming your devices.
• Signature-byte testing feature prevents user-induced faults and ensures chip protection.
• The 48Pro2c Programmer protects all its inputs, including the ZIF Socket, PC, and power supply input, from 15kV ESD.
• The 48Pro2c programmer performs verifications by maintaining the power supply voltage at minimal levels and improves programming efficiency by ensuring long data retention guarantees.
• The programmer can be used for handling PLCC, JLCC, SOIC, SDIP, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP socket types and other packages.

Programmer Features:

• 1 Universal Programming Device (1 x 48-pin DIL ZIF socket and ISP Connector)
• LEDs displaying programming results
• USB 2.0 Input
• FPGA-based IEEE 1284 connected port
• Power input and parallel port connection with surge and ESD protection
• Banana jack for ESD wristband connection
• Banana jack for grounding connection

Module Features:

• Main Unit (DAC) On-board feature: powerful microprocessor and FPGA-based state machine.
• 3 D/A Converters to control VCCP, VPP1, and VPP2 rise and fall times
• VCCP range from 0.8V to 1A
• VPP1, VPP2 range from 0.26V to 1A
• Self-testing capability
• ZIF Socket: Accepts 48-pin DIL ZIF sockets for 300/600 mil devices.
• Pin Reading: 48 Universal.
• VCCP/VPP1/VPP2 can be connected to each pin.
• Smooth surface for each pin.
• FPGA-based TTL driver allows for H, L, CLK, Forward-Backward push.
• Analog pin output levels selectable from 1.8V to 26V.
• Current limiting, overcurrent protection, and self-protection during power failures.
• ESD protection for each pin socket (IEC1000-4-2: 15kV air, 8kV contact)
• Tests each pin before programming.

ISP Connector:

• 20-pin male connector.
• 6 TTL pin outputs providing H, L, CLK, pull-up, pull-down; adjustable between 1.8V and 5V (including low voltage).
• 2 pins with 1x VCCP voltage (range 2V..7V/100mA range)
• Ability to measure the source value and voltage of the programmed device.
• 6 pins with 1x Vpp voltage (2V..25V/50mA range)
• Target system source voltage (2V..6V/250mA range)
• ESD protection for each pin socket (IEC1000-4-2: 15kV air, 8kV contact)
• Displays the status of two output signals on the screen as "LED OK - LED ERROR."
• Switches to "YES!" when the output signal reaches the equivalent.